Skip to content
Search RD CUSTOMZ

Language

Cart, 1 item

Audi RS Q3 door-entry lights

The RS Q3 and RS Q3 Sportback share the Q3 F3 base, and Audi's accessory list names the Q3 F3 but not the RS Q3 separately. As orientation: QQ2 covers front and rear doors; QQ1 covers all four only on cars built before production week 32 of 2019 and the front pair after that, and the RS Q3 years start in 2020. The factory lamp in each door is the proof.

How to order: enter your car model and year when you order. We send the right version for your car.

Which RS Q3 do you have?

  • RS Q3 F3

    2020–2023

    The SUV. Q3 F3 rule as orientation: QQ2 front and rear; QQ1 front only on cars built from week 32/2019.

  • RS Q3 Sportback F3

    2020–2023

    The coupé-shaped version with the sloping roofline. Same Q3 F3 rule as orientation.

Door lights for Audi

What your car needs

Audi door-entry light housing seen from the back, with its single connector
The Audi version: a single connector at the back. Enter your model and year when you order and we send the right version.

The projector replaces the factory door lamp in the lower edge of the door panel: unclip the lamp, plug the projector into the same connector and press it in. If your RS Q3 has no lamp there from the factory, there is no connector, and the set does not fit.

QQ1 or QQ2 is on the vehicle data sticker, in the service booklet and in the boot. With QQ1 the Q3 rule points to the front doors only, so check the rear doors in the dark before ordering four.

Plug & play and CAN-bus proof, so no warning on the dash. How to replace the lamp →

The option codes on this page are the manufacturer's rules for its own original projector.

2 or 4 lights?

QQ2, or lamps in all four doors: set of 4. QQ1: set of 2 for the front doors, unless the rear doors light up too.

Frequently asked questions

Is the RS Q3 Sportback different from the RS Q3 for door lights?
Not for the fit. Both have four doors on the Q3 F3 base; the lamps in the doors decide between a set of 2 and a set of 4.
My RS Q3 has QQ1. Why only the front doors?
Because by Audi's Q3 F3 rule, QQ1 stands for the front doors on cars built from production week 32 of 2019. Audi does not name the RS Q3 separately, so look at your rear doors: light on the ground means a lamp.
Where do I find QQ1 or QQ2 on an RS Q3?
On the vehicle data sticker: one copy is in the service booklet, the other in the boot. The codes are in the block of three-character codes.

Help and explanation

Other Audi models

All Audi models

RD Customz sells its own aftermarket set, not an Audi genuine part.

Cart (1)

Subtotal$23.00

Including VAT. Shipping is calculated at checkout.

View cart

Search

Your legal guarantee rights

EU notice on the legal guarantee of conformity
Open full size

More information: europa.eu/youreurope/guarantees

My car

Loading cars…