Audi A6 door-entry lights
For the Audi A6, Audi lists its logo projector for two generations. On the C8 (2019–2025) the front doors are covered by QQ0, QQ1 or QQ2, and the rear doors only by QQ1 or QQ2. On the C7 (2011–2018) it is QQ1 or QQ2, front and rear. Both share one exception: with the Bang & Olufsen system that carries code 8RF, Audi no longer names the rear doors. For the A6 before 2011 and the newest A6 we have no manufacturer data.
How to order: enter your car model and year when you order. We send the right version for your car.
Which A6 do you have?
-
A6 C8 C8
2019–2025
Two touchscreens in the centre console, sharp bumper lines, narrow headlights. Front doors with QQ0, QQ1 or QQ2; rear doors with QQ1 or QQ2, not with 8RF.
-
A6 C7 C7
2011–2018
Flowing roofline, chrome grille with horizontal slats, analogue dials in the dashboard. QQ1 or QQ2, front and rear; rear doors not with 8RF. This generation also exists with a halogen lamp and a wide plug.
-
A6
2025–2026
No manufacturer data yet.
-
A6
2004–2011
Not in Audi's list for the LED logo projector.
Door lights for Audi
What your car needs

The projector clicks into the existing courtesy lamp at the bottom of your door. If your car has no lamp there from the factory, there is no connector to plug into.
Body style and trim level make no difference to the connection: what matters is the lamp in the door.
Audi uses two types of connector under the door: a narrow one for the LED version and a wider one for the older halogen version. You don't need to check which one you have: enter your model and year when you order and we send the right version. How to replace the lamp →
The option codes on this page are the manufacturer's rules for its own original projector.
2 or 4 lights?
Set of 2 = front doors, set of 4 = all four.