Black rear rings for the Audi Q3: F3, Sportback and 8U
The Audi Q3 has had rear rings in two sizes. Audi dealers list about 20.1 × 7 cm for the second-generation Q3 (F3) and a narrower emblem for the Q3 Sportback. Our gloss black rear rings come in 192 and 202 mm.
Which size for your Q3?
- Q3 F3 (from 2019, not the Sportback): Audi's black rear rings (83A 071 802) are listed at about 20.1 × 7 cm. Choose 202 mm.
- Q3 Sportback (from 2019) and RS Q3 Sportback (from 2020): Audi uses series part 8V5 853 742 here, listed at about 18.7 to 19 cm. Our 192 mm version is the closest size and a few millimetres wider. Measure before you order.
- Q3 8U (2011–2019): Audi lists the same series part, 8U0 853 742, as for the A1 GB. The black version of that part is listed at about 20.1 × 7 cm, so 202 mm is the size to check first.
Check in two minutes
Measure your current rings from the outer edge of the left ring to the outer edge of the right ring, holding the tape against the rings. About 192 mm or about 202 mm tells you which size to order. Then enter your car model and year in the order field; we check it before we ship.
Fitting
The rear rings are held by adhesive tape. Our fitting guide shows how to remove the old rings without marking the paint and how to stick the new ones on straight.
Further reading
Black rear rings 192 / 202 mm · Size guide · Fitting guide · All emblems
Sources: AHW Shop (Audi dealer), listings for 83A 071 802 (Q3 F3, about 20.1 × 7 cm) and 8V7 071 802 (Q3 Sportback, about 18.7 × 6.5 cm); Audi Zentrum Göttingen, listings for 8V5 853 742 T94 (Q3 Sportback from 07/2019) and 8U0 853 742 (Q3 8U and A1 GB); Ramsperger Automobile, listing for 8V5 853 742 T94 (about 19 × 6.5 cm); Kunzmann (Audi dealer), listing for 8U0 853 742 B T94 (about 20.1 × 7 cm). Consulted November 2026.