Skip to content
Search RD CUSTOMZ

Language

Cart, 0 items

BMW wheel center caps 68 mm: which ones fit your wheels?

BMW uses two common sizes of wheel center cap: 68 mm and 56 mm. Most alloy wheels on the E and F generations take 68 mm; most newer G-series models take 56 mm. The model gives you a good first guess, but the wheel decides, so the reliable check is to measure the cap you have now. Below you will find how to measure, which models use 68 mm and how to swap the caps without damaging your wheels.

1. Measure your current cap

  • Cap still in place. Hold a ruler or caliper across the front of the cap and measure from edge to edge at the widest point. That outer diameter is the size that counts.
  • Cap missing or broken. Measure the round recess in the face of the wheel where the cap sits.

About 68 mm means our set fits. About 56 mm means your wheel needs the smaller size. A clearly different figure usually points to aftermarket wheels or a special design.

2. 68 or 56 mm: the rule of thumb

  • 68 mm: most BMW alloy wheels with the 5×120 bolt pattern, used on the E and F generations.
  • 56 mm: the 5×112 wheels BMW moved to with the G generation, such as the 3 Series G20, 5 Series G30, X3 G01 and X5 G05, and models such as the X1 F48 and the 2 Series Active Tourer.
  • Exceptions: some wheel designs from the 1990s use their own cap, and aftermarket wheels usually come with caps in their own size.

3. Which BMW models use 68 mm

On factory alloy wheels, 68 mm is usual on the 1 Series E81–E88 and F20/F21, the 2 Series Coupé and Convertible F22/F23 and M2 F87, the 3 Series E46, E90–E93 and F30/F31/F34, the 4 Series F32/F33/F36, the 5 Series E39, E60/E61 and F10/F11, the X1 E84, the X3 E83 and F25, the X5 E53, E70 and F15 and the X6 E71 and F16. The list tells you where 68 mm is usual, not that every car of that model has it.

Per model: 1 Series · 2 Series · 3 Series · 4 Series · 5 Series · X1 · X3 · X5 and X6

4. Removing the old cap

  • Clean the area around the cap first, so you do not drag grit across the paint.
  • Put a plastic pry tool or a flat screwdriver wrapped in tape into the small gap at the edge of the cap and lever gently; work your way round until the clips let go.
  • With the wheel off the car, you can also push the cap out from the back with your thumbs.

5. Clicking in the new cap

Check that the recess is clean and dry. Line the roundel up, for example with the valve, so all four look the same, and press the cap in evenly with the palm of your hand until the clips snap in all round. If a cap does not sit firmly, take it out and check for dirt or a bent clip; do not drive with a loose cap.

6. Ordering

Enter your car model and year in the order field when you order; we check it before we ship. Because the wheel decides the size, measuring your current cap remains the reliable check. If in doubt, send us a photo of your wheel.

Further reading

BMW Wheel Center Caps 68 mm – Set of 4 · All wheel center caps · Contact us

Sources: Apex Wheels, BMW bolt pattern and centerbore guide (apexwheels.com); BimmerWorld, listings for 5×112 BMW models (bimmerworld.com); Turner Motorsport, listing for BMW part 36 13 6 783 536 (turnermotorsport.com). Consulted November 2026.

Cart (0)

Your cart is empty

Continue shopping

Search

Your legal guarantee rights

EU notice on the legal guarantee of conformity
Open full size

More information: europa.eu/youreurope/guarantees

My car

Loading cars…